View ENA1293_4787906.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA1293
LV0220CS
Overview
Monolithic Linear IC
For Optical Pickups
Front Monitor OE-IC
The LV0220CS is a front monitor optoelectronic IC for optical pickups that has a built-in photo diode compatible with three waveforms. A high-speed process is adopted, and high sensitivity and high reliability are obtained with 405nm AR coating cover glass. Moreover, LV0220CS is small size and thin type CSP packages.
Functions
* I-V amplifier with a built -in PIN type photo detector ( = 0.7mm) that supports three wavelengths * Differential output amplifier * Mode switching (BD/DVD/CD gain, volume output switching)
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta 75C * Conditions Ratings 6 92 -10 to +75 -40 to +85 Unit V mW C C
* Mounted on a specified board: 20mm x 20mm x 1.6mm, glass epoxy board.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
82008 MS PC 20080414-S00002 No.A1293-1/5
LV0220CS
Recommended Operating Conditions at Ta = 25C
Parameter Operating supply voltage Operating reference voltage Mode switch CD DVD BD Output load capacitance Output load resistance Symbol VCC Vref VswC VswD VswB Co Zo DVD mode when SW pin is floating Conditions min 4.5 1.9 2.6 1.25 0 12 3 20 1.65 Ratings typ 5.0 2.2 max 5.5 2.5 VCC 2.0 0.8 33 V V V V V pF k Unit
Electrical and Optical Characteristics at Ta = 25C, VCC = 5.0V, Vref = 2.2V, RL = 6k, Rin = 1k
Parameter Current dissipation Output offset voltage Output DC voltage Temperature dependence of offset voltage * Optical output voltage * VOC VOD VOB D range * Frequency characteristics * VD fCC fCD fCB Output noise voltage * Settling time * Response time * Vn Tset Tr, Tf Tr, Tf VO = 0.9Vp-p, output level (10 to 90%), fC = 10MHz, duty = 50% Tr-Tf, VO = 0.9Vp-p, output level (10 to 90%), fC = 10MHz, duty = 50% Overshoot * Undershoot * Linearity * Wavelength dependence of output voltage * : Parameters are design values for reference. Ovst Unst Lin Vof VO = 0.9Vp-p VO = 0.9Vp-p At output voltages 0.5V and 1.0V = 400 415nm -1 -2 15 15 +1 6 % % % % -1.5 CD mode, = 780nm DVD mode, = 650nm BD mode, = 405nm Voltage between OUT+ and -3dB (1MHz reference), = 780nm -3dB (1MHz reference), = 650nm -3dB (1MHz reference), = 405nm f = 30MHz, RBW = 30kHz, VBW = 100Hz, Blue mode 10 15 ns ns 1.96 2.09 0.83 2200 24 40 40 2.45 2.61 1.04 2600 30 50 50 -88 -83 2.94 3.13 1.25 mV/W mV/W mV/W mV MHz MHz MHz dBm Symbol ICC VOfs VOdc VOfsT At shielding, voltage between OUT+ and At shielding, OUT+ and - voltage, Vref standard Ta = -10 to 85C, at shielding 20 50 80 V/C -30 0 +30 mV Conditions min 9 -20 Ratings typ 13 0 max 17 +20 mA mV Unit
Response time difference *
+1.5
ns
PD-wave length sensitivity ratio (when DVD = 1)
CD DVD Blue 1.1 1.0 0.6
No.A1293-2/5
LV0220CS
Package Dimensions
unit : mm (typ) 3352
TOP VIEW SIDE VIEW BOTTOM VIEW 0.8 0.555
0.348
1.91
6
7 5
8
9 10
0.348
4 1 2 SIDE VIEW
0.67 MAX
3 0.4
2 0.4
1 0.4 0.355
0.2
0.1
(0.5)
SANYO : ODCSP10(1.40X1.91)
Pin Assignment
OUTD 6 OUTB 5 4 OUT+ 3 OUT2 IN OUTC 7 SW 8 VCC 9 10 GND 1 VREF
Bottom view
Block Diagram and Test Circuit Diagram
GND 10 Vref VREF
0.1F
GND
0.352
1.4
VCC 9 VCC VCC 8
CD
Vref
1.78k
IN
200
2
+
SW Vsw
OUT20pF 6k
Vref 3 Buffer
DVD BD
7
CD DVD BD
OUTC
OUT+ PD 4 Buffer GND Vref +
6
OUTD
20pF
5
Rin=1k Rin=1k Rin=1k
0.1F
1
OUTB
Vsw(V) 2.6V to VCC 1.25V to 2.0V 0V to 0.8V
Gain CD DVD BD
No.A1293-3/5
LV0220CS
Pin Description
Pin No. 1 2 Pin Name VREF IN Description Reference power supply voltage pin. Differential output input-pin. Equivalent Circuit
200
1.78k
3 4 5 6 7
OUTOUT+ OUTB OUTD OUTC
Negative side output pin. Positive side output pin. Blue mode volume output pin. DVD mode volume output pin. CD mode volume output pin.
8
SW
Mode switch pin.
136k 1k
64k
9 10
VCC GND
Power supply voltage pin. Ground pin.
No.A1293-4/5
LV0220CS
Photo-receiver Layout
PD aperture size = 0.7mm The center of PD corresponds to the center of the package
Top view unit:mm 0.5
Marker 0.1
0.4 1.4
Marker 0.1
Glass thickness
0.7
1.91
0.6
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of August, 2008. Specifications and information herein are subject to change without notice. PS No.A1293-5/5

▲Up To Search▲

Price & Availability of ENA1293

	To Download ENA1293 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .